
Steel mill supplier — Shandong, China
Steel plate, coil and pipe,
supplied to specification.
Carbon, stainless, galvanized and prepainted steel in coil, plate, tube, profile and bar. ASTM, EN, JIS and GB grades, EN 10204 3.1 mill certificates, and export packing built for long sea freight.
20+
Years supplying steel
1,000+
Buyers worldwide
120k t
Steel delivered
7–10 d
Ex-stock dispatch
Standards we supply toASTMEN 10025JISGB/TAS/NZSEN 10204 3.1
01 — Product range
Specified by grade.
Supplied by the tonne.
Coil, plate, tube, profiles, roofing and bar — each quoted to your grade and tolerance, with the mill, packing and delivery confirmed in writing.
02 — Selected stock
The grades buyers ask for most.
A snapshot of what moves through the warehouse each week. Full stock lists and mill allocations are quoted on request.

Prime coil1,250 mm ODSlit to orderJaron Steel warehouse
03 — How we supply
Mill-direct, with the
paperwork to prove it.
We quote against your specification, then hold the mill, the inspection and the export documents on one schedule — nothing waits on a second supplier.
Third-party inspection/SGS·BV·TÜV·Intertek
01
Specification review
Drawings, standards and tolerances are checked before a price is issued — so the quotation matches what the mill can actually roll.
02
Mill allocation
Rolling, slitting, shearing or coating is booked at partner mills in Shandong and Hebei against your delivery window.
03
Inspection
Chemical composition, mechanical properties, dimensions and surface are checked per lot; an EN 10204 3.1 certificate travels with the steel.
04
Packing & loading
Eye-to-sky coils, strapped bundles and V-cradles, with photos and video before the vessel closes.
04 — Specification matrix
What we can hold to.
Typical supply ranges. Tighter tolerances, non-standard sizes and mill-specific grades are quoted on request.
Scroll the table horizontally →
| Family | Typical grades | Supply form | Standards |
|---|---|---|---|
| Coil & strip | A36 · SS400 · S355JR · DX51D · PPGI (RAL) | Coil 3–25 t · slit strip · cut-to-length | ASTM A1008 · EN 10025 · JIS G3101 |
| Plate & sheet | A36 · A516 Gr.70 · S355J2 · NM400 · AH36 | Plate 1.5–200 mm · sheared or plasma cut | ASTM A516 / A572 · EN 10025-2 · JIS G3106 |
| Pipe & tube | A106 Gr.B · A53 · A312 304/316L · A335 P11 | Seamless 1/8–24 in · welded to 3,000 mm | ASTM A106 / A312 · EN 10216 · JIS G3454 |
| Profiles | A992 · S355JR · SS400 · S275 · Q355 | HEA–HEM · IPE · UPN · equal angle | ASTM A6 · EN 10025 · JIS G3192 |
| Roofing | DX51D+Z · PPGI (RAL) · AZ150 | 0.12–1.2 mm · corrugated / trapezoidal | EN 10346 · ASTM A653 |
| Bar & rod | 1018 · 1045 · 4140 · 304/316L · 2205 | Round 6–500 mm · square · flat | ASTM A29 · EN 10278 · JIS G4051 |
All shipments include an EN 10204 3.1 mill test certificateDimensional and surface reports on request
05 — Order flow
From enquiry to bill of lading.
One coordinator from the first quotation to the final loading report.
01
Enquiry
Specification, quantity, destination port and target date.
02
Quotation
Grade, mill, tolerance and Incoterms on one sheet.
03
Production
Rolling, slitting, shearing or coating against the approved spec.
04
Inspection
MTC 3.1, dimensional report and third-party inspection if required.
05
Shipment
Export packing, loading photos, B/L and the full document set.
Stock orders 7–10 daysCustom production 15–30 daysThird-party inspection on request
06 — Applications
Where the steel ends up.
Construction, automotive, energy, marine and precision engineering — the same coil, plate and tube, held to a different standard.

01
Construction & infrastructure

02
Automotive & appliance

03
Energy & pressure equipment

04
Aerospace & precision

07 — Packing & logistics
Export packing that
survives the voyage.
Seaworthy packing, documented loading and shipping from Qingdao, Tianjin or Shanghai.
Packing
Waterproof kraft paper, inner and outer steel edge protectors, circumferential and radial strapping, wooden or steel pallets.
Loading
Coils in V-cradles, plates on anti-slip mats, pipe bundles blocked and strapped. Photos and video of every load before departure.
Ports
Qingdao · Tianjin · Shanghai. FOB, CIF, CFR and DAP terms. China–Europe rail for inland destinations.
EN 10204 3.1
Mill test certificates
SGS · BV · TÜV
Third-party inspection
Chemical & mechanical
Test reports per lot
Loading photos
Every shipment
08 — Questions
Answers before you ask.
Still need something specific? Send the grade and size — we will confirm stock and lead time the same day.
What is the minimum order quantity?
Tube starts at 1 t per size, plate at 1–2 t and coil at 3–5 t. Trial orders are welcome and we quote the exact MOQ against your specification.
Do you supply mill test certificates?
Yes. Every lot ships with an EN 10204 3.1 certificate, plus chemical and mechanical reports. Certificates can be issued before shipment for approval.
How long is delivery?
Stock items leave in 7–10 days; custom production takes 15–30 days depending on grade and quantity. Project schedules are confirmed in writing at order.
Can you cut, slit or bevel to size?
Yes — cut-to-length, slitting, shearing, beveling and OEM packing are quoted as part of the order, not as a separate service.
Can I book third-party inspection?
SGS, BV, TÜV, Intertek or your nominated agency, before packing or at loading. Inspection is arranged at cost.
09 — Request a quote
Send the specification.
We will send the price.
Include grade, size, quantity and destination port. Most enquiries are answered within one working day.
Phone
Office
Shandong, China · Mon–Fri 09:00–17:00 (GMT+8)
Request a quotation
Response within 24 h














